How to normative use the PU foam seal strip gasket machine
With the increasing production demand, some old industrial equipment and industrial operation levels are gradually replaced by faster production speed, better working performance of new products and new industrial machine operations. In order to adapt to the rapidly changing needs of the market economy and the expansion of the company's business, we must learn how to use the new machines to have a place in the highly competitive environment. So today you can teach you how to quickly get to the PU foam seal gasket machine, but before we formally learn how to operate the PU foam seal gasket machine, we must first have a systematic understanding of the PU foam seal gasket machine.
What is the PU foam seal strip gasket machine?
The CNC PU foam sealing gasket machine is an automated machine that specifically controls the fluid, drips, coats, and seals the liquid on the surface or inside the product.The CNC PU foam seal gasket machine is mainly used for glue, oil, paint and other liquid in product process. Note, coating, drip to the precise position of each product, can be used to achieve the dot, line, circular or arc.
What is the operation process of the PU foam sealing strip gasket machine?
For the sake of scientifically correct and safe operation of the equipment. Prevent damage to people and equipment and prolong the service life of equipment. Users must be properly familiar with the relevant content.
1.Before starting up, first, first understand and be familiar with the working principle, basic structure and relevant technical requirements of the machine tool, and prepare the spot inspection according to the work log. For example, clean up the machine tool, remove the oil and dust on the machine tool surface; conduct the machine tool lubrication according to the lubrication instructions; daily test and check whether the electrical lines and pneumatic lines, according to the column, head, pneumatic line fracture, damage or fall off and leakage phenomenon should be timely found and rectification.
2.In the process of operation, first press the power supply, and then connect the compressed air pipe, so that the air repulsion within 0.3Mpa, finally install the harness, confirm that each part of the machine is normal working strong state, and then start to finishing adjustment.
3.When the work is ready to stop, complete the work in the order of stopping the compression cylinder, pressing the stop button, clean up the machine tool, turn off the power supply and fill in the work log.
What are the precautions for the operation of the PU foam seal strip gasket machine?
1.During a long time shutdown, butter must be applied at the thread to prevent air intake caused by dry glue.
2.Every time after changing the glue mouth, do not open the glue gun empty go a procedure, observe whether there is aluminum touch the gun mouth in the process, if any, immediately report to the technical personnel.
3.The operator shall not adjust the system parameters without authorization.
4.No physical penetration into the working area during operation.
To sum up, the basic process of PU foam seal gasket machine and operation precautions is almost these, in the PU foam seal gaser production field many companies have done well, such as SHZPower is a professional CNC PU foam seal gaser China manufacturer, if you want to know more about CNC PU foam seal gaser latest product information, and want to find high quality CNC PU foam seal gasket machine, welcome to send email for the latest product quote and get contact.
