How to choose the right needle for the CNC PU foam sealing gasket machine?
As the saying goes: "A good horse with a good saddle", it is very important to choose a very suitable needle for a glue machine that is not cheap, and the quality of the needle can bring twice the result with half the effort. Today we will take a look at how to choose the right needle for the glue machine.
What is the CNC PU Foam Sealing Gasket Machine?
The CNC PU Foam Sealing Gasket Machine is an automated machine that specifically controls the fluid, drips, coats, and seals the liquid on the surface or inside the product.The CNC PU foam seal gasket machine is mainly used for glue, oil, paint and other liquid in product process. Note, coating, drip to the precise position of each product, can be used to achieve the dot, line, circular or arc.
The CNC PU Foam Sealing Gasket Machine mainly applies to all kinds of solvents, adhesives, oil, paint, chemical materials, solid glue, etc., including silicone, EMI conductive adhesive, UV glue, AB glue, fast drying glue, epoxy glue, sealant, grease, tin paste, transparent paint, screw fixant, ink, pigment, etc.
How to properly maintain the CNC PU Foam Seal Gasket Machine?
After using the CNC PU Foam Seal Gasket Machine, be sure to remember to clean the glue machine. At the same time, the residual glue and dust should be removed on the machine to keep the CNC PU foam seal gasket machine clean, so that the machine is always in the best state; At the same time, the CNC PU foam seal gasket machine needs to periodically check whether the electrical cable is loose and the grounding reliability. the CNC PU foam seal gasket machine is still very strong, which has been strictly tested before leaving the factory and is very firm and durable. However, as a machine, there are still many fine points, so it is more necessary to carefully maintain and maintain.
What are the needle selection methods?
1. Four principles:
Small point - small needle, low pressure, short time Large point - large needle, large pressure, long time thick glue - inclined needle, large pressure, as needed to set the time Water-based liquid - small needle, less pressure, as needed to set the time.
2. Fluids requiring special Settings:
(1) Instant glue: Safety piston and Teflon lined metal needle are used for water-based instant glue, conical inclined needle is used for thick instant glue, and PP needle is used if flexible.
(2) UV glue: Use amber needle barrel, white piston and inclined needle (can block UV).
(3) Light curing adhesive: The use of black opaque syringe, white piston, can block ultraviolet needles.
(4) Anaerobic glue: Use 10CC syringe and white PE universal piston.
(5) sealant and paste fluid: If the white piston rebound is serious, please use the safe living type and the inclined needle.
The price of CNC PU Foam Seal Gasket Machine
The price of the glue machine is subject to fluctuations of many factors, usually the price will be affected by raw materials, market environment, research and development costs, so there will often be different prices, if you want to know the latest price can contact me.
Supplier of CNC PU Foam Seal Gasket Machine
To sum up, the basic process of PU Foam Seal Gasket Machine and operation precautions is almost these, in the PU foam seal gasket production field many companies have done well, such as SHZ Power is a professional CNC PU foam seal gasket China manufacturer, if you want to know more about CNC PU foam seal gasket latest product information, and want to find high quality CNC PU foam seal gasket machine, welcome to send email for the latest product quote and get contact.
